Pallet
baling press
FULLY AUTOMATIC PALLET PACKING PRESS FOR SECURING TRANSPORTED GOODS
Pallet pack presses strap all kinds of palletized goods—whether print media, food, or corrugated cardboard. With a pressing force of 30,000 N or 50,000 N, they compact packages before strapping, preventing the strapping band from loosening during transport. Two to four band guide tongues ensure optimum load securing and productivity. The overhead, weight-reduced SoniXs also simplifies maintenance work: quick-release fasteners allow the unit (32 kg) to be easily removed and replaced once the work is complete.
For more demanding requirements, the pallet packing presses are available with a high-speed drive. This optional package increases the pressing pressure to 33,000 N or 55,000 N and boosts the cycle output. Two independent braking systems ensure optimum safety.
Key features
Standard features
-
SoniXs ultrasonic sealing system
-
With up to four belt guide tongues for palletized packages
-
Belt guide spacing of 440 mm, 625 mm and 810 mm
-
1 - 2 units laterally movable
-
Siemens PLC system with touch panel
-
Integration into any processing line possible
-
Potential-free contacts to upstream and downstream machines
-
Strapping with medium compaction (up to 30,000 N - model KC_)
-
Strapping with high compression (up to 50,000 N - model KP_)
-
Versions:
- [K_R] Basic model | Driven roller conveyor
- [K_K] Variant | Driven roller conveyor with lifting rotary kiln
- [K_Z] Variant | Driven roller conveyor with centering device
- [K_A] Variant | Driven roller conveyor with lifting turnstile and centering device
- [K_T] Variant | Driven roller conveyor with turntable
- [K_S] Variant | Driven roller conveyor with side-travel turntable
Optionen
-
3-part signal light, including end-of-tape detection
-
Closed lower hinge guide (except K_A and K_Z)
-
Automatic, electric edge protection feed at the top and bottom
-
Pallet length measurement
-
High-speed drive
-
High-speed package for higher strapping performance
-
BSG 4 strap welding unit
-
Protective grille
-
Air conditioner
-
Data interface for product-dependent program preselection
-
Control unit with 12" touch panel
-
Configurable strapping programs
-
Service Locking Device
-
Permanent lubrication of bearings and pinions
-
Up to 220 pallets/h without edge protectors*
Up to 185 pallets/h with top and bottom edge protectors*
*With high-speed package, 2-fold vertical strapping, transport 24 m/min (depending on product)
Performance
-
From 200 N to 2,500 N (infinitely adjustable)
Strap tension
-
From 1,800 mm to 3,200 mm (in 200 mm increments)
Passage width
-
Height:
300 mm (minimum delivery height)
Conveyor technology
-
Siemens PLC system
Control system
-
PET :
-
Width: 9.50 mm - 12.50 mm
Thickness: 0.54 mm - 0.66 mm
Strapping Material
-
Core diameter:
406 mm
Strap coil dispenser
-
2 heads:
440 mm or 625 mm
-
3 heads:
440 mm and 625 mm
-
4 heads:
440 mm and 810 mm centered,
625 mm asymmetrical [185 mm possible]
440 mm and 625 mm centered
-
On the right-hand side you can see the respective head spacing for the number of heads.
Belt guide heads
-
Mains voltage:
400 V, 50 Hz, 3L+N+PE (other mains voltages available on request)
-
Power consumption:
23.5 kVA (depending on configuration)
Electrics
-
Approx. 5,000 kg (without options)
Weight
Consumables
for pallet packing press
Service & Maintenance
for pallet packing press
Companies operating worldwide often need to secure goods for transport at different locations. They expect the same quality and reliability no matter where they operate. You can expect consistently high quality from our technologically advanced strapping machines, equipment and consumables. In addition, we provide an excellent service network with an outstanding range of support. You get exactly what you need, wherever you are - in no time.
