SoniXs MP-6 R-VA

• Corrosion-resistant ultrasonic sealing system with electronic self-calibration
• High-end Standard 6 sealing unit
• Easy accessibility and tool-free disassembly of strap path components
• Wear-free DC drives with integrated electronics
• Stepless turnable control panel for many-sided operation
• Adjustable strap tension via control panel
• Switching from maximum to material-friendly Ecospeed in the control
• Quick strap coil change
• Strap coil changeable from the front and the side
• Automatic strap threading system
• Strap end detection with ejection of remaining strap
• Automatic strap loop ejection
• Extremely low energy consumption
• 4 castors, 2 of them lockable (Ø 80 mm)
• CE marking inclusive conformity declaration
• Potential-free contacts to upstream and downstream machines
• Continuously adjustable conveyorspeed from 0-1 m/s
• Parameter control panel for setting strapping parameters
• Selector switch for pass, single, double or multiple strapping
• Machine completely corrosion-resistant (main use of
• V4A stainless steel)
• IP 56 protection class design
• Sensitive components (e.g. motors) are equipped with additional covers

• Pneumatic hold-down device
• Automatic adjustment of the strap tension package height detection
• Lowering chassis H = 730 – 835 mm
• Safety pop-up roll at table in- and outfeed
• Product cover identification device (no strapping without top cover)
• Brush guide
• Low strap detection with signal in the control panel
• Signal light
• Emergency stop Interface

Capacity: up to 35 cycles / min. using 5 mm strap

Straps: Standard machine PP straps: Width 5 - 12mm, Thickness 0.4 - 0.63mm
The machine is adjusted to one of the mentioned strap widths.

Strap coil dispenser:
Core diameter: 200 mm
Core width: 190 mm
max. outer diameter: 430 mm

Electricity:
Voltage: 100-240V, 50/60 Hz, 1L+N+PE
Power consumption: approx. 0.25 kW

Sealing unit: Standard 6 unit

Weight: 260 kg

Frame size (WxH):
600 x 600 mm

Working heights:
820 mm to 925mm
730 mm to 835 mm (optionally lower working height)
820 mm to 1025 mm (optionally increased working height)