Evolution SoniXs TRC-6

• Symmetrical design of the conveying system to the strapping level
• Easy accessibility and tool-free disassembly of strap path components
• Tool-free disassembly of roller system
• Easy operation over digital display in the control panel
• High-end Standard 6 sealing unit
• Ultrasonic sealing system with electronic self calibration
• Bundle positioning via increments by metrical input of the strapping positions
• Pneumatic hold down device with manual prepositioning
• Transport by aluminium rollers
• Potential-free contacts to upstream and downstream machines
• Open design without protective coverings – CE marking inclusive conformity declaration
• Selector switch for single, double or multiple strapping
• Quick strap coil change
• Fully automatic strap threading
• Defined strap end detection with ejection of remaining strap
• Automatic strap loop ejection when machine cycles without bundle
• Structural coating RAL 5010 gentian blue

• Traffic light warning system including strap end indication
• Special working heights
• Special coating according to RAL scale
• Pneumatic backstop with manual prepositioning
• Table extension

Performance:
Up to 38 cycles / min. at a frame size of 1250 x 600 mm

Conveying heights:
765 - 980 mm (standard)
630 - 845 mm (optional lower working height)
965 - 1380 mm (optional higher working height)

Straps:
Standard machine grade 5, 6, 8, 9, 10 or 12 mm wide PP straps
The machine is adjusted to one of the mentioned strap widths

Strap coil dispenser:
Core diameter: 200 mm
Core width: 190 mm
Max. outside diameter: 430 mm

Electricity:
Network data: 100 - 240 V, 50/60 Hz, 1 PH*
Power consumption: approx. 0.4 kW

*Country specific adaption possible

Pneumatics:
Operating pressure: 6 bar (1/4 inch rapid clutch)
Air consumption: 3.5 Nl/cycle at use of pneumatic hold-down device; 9.3 Nl/cycle at use of pneumatic hold-down device and backstop

Weight:
450 - 730 kg